Bulk Bag Conditioner Integral To Unloader
A new Bulk Bag Conditioner-Unloader System from Flexicon Corporation (Australia) Pty Ltd. loosens bulk solid material that has solidified during storage and shipment, allowing the material to discharge through a bag spout.
The integral configuration of the conditioner eliminates the time, labour and equipment needed for separate loading of bulk bags into a stand-alone conditioner. The design also consumes significantly less floor space than two separate pieces of equipment and requires less material and labour to construct, reducing initial cost, according to the company.
Two hydraulic rams with contoured end plates press opposing sides of bulk bags, which can be raised and lowered for conditioning at varying heights using an electric hoist. The hoist assembly also includes a motorised trolley to allow loading and unloading of bulk bags without the need for a forklift.
The conditioner’s controller and hydraulic pump can be mounted on the exterior of the unloader or remotely. Safety interlocks disallow operation of the conditioner when the unloader’s doors are open.
The unloader also features a Spout-Lock clamp ring that forms a high-integrity seal between the clean side of the bag spout and the clean side of the equipment, while a Tele-Tube telescoping tube maintains constant downward pressure on the clamp ring and bag spout, elongating the bag as it empties to promote complete discharge.
Immediately above the clamp ring is a Power-Cincher flow control valve employing a series of curved, articulated rods that cinch the bag spout concentrically, allowing dust-free retying and removal of partially-empty bags.
The surge hopper is equipped with an optional dual-shaft agitator that de-agglomerates material and promotes flow into an optional, integral auger conveyor to feed a downstream process.
The entire unloading frame is mounted on load cells that transmit loss-of-weight data to a controller that starts and stops the auger conveyor, allowing programmable weigh batching directly from bulk bags.
Other equipment manufactured by the company include bulk bag fillers, flexible screw conveyors, pneumatic conveying systems, manual dumping stations, drum tippers, multi-ingredient weigh batching systems and automated plant-wide systems integrated with new or existing processes.
Contact Flexicon Corporation (Australia) Pty Limited
Thank you for your enquiry! Flexicon Corporation
(Australia) Pty Limited will be in touch as soon as
Sorry, there seems to have been an error.
Please double check your details and try again.
- Hygienic Bag Dump Station
- Bulk Bag Filler Integrates NTEP-Certified Weigh System to Enable +/- .01% Weigh Accuracy of Filled Bag
- Dust Collector Upgrade at Port Kembla Cement Plant
- Conveyors and Bulk Handling Unit Improve Safety and Processing of Fertilisers