The RPU-352 is a special purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes so that the conditions inside and outside the package can be measured at the same time.
The instrument passes through the pasteuriser with the product and after the run the PU value achieved, together with several other important results, is calculated automatically. Standard results calculated are: total PUs achieved, time accumulating PUs, time in holding zone, maximum values of all channels etc. All sensor readings are shown continuously allowing the unit to be used as a thermometer.
Redpost’s latest series of monitors prevents product spoilage by calculating the temperature of the product when it leaves the pasteuriser, this exit temperature is shown with the other results.
Results are displayed on the instrument allowing immediate confirmation of correct pasteurisation, the display can show graphs and lists of recorded data, data can be displayed in a choice of units. The conditions during several runs can be recorded and examined before the data is printed or transferred, this allows end-to-end working without returning to the laboratory.
The RPU-352 is compatible with Redpost’s popular RPC-80 and RPC-50 printer/chargers. With these, reports can be printed or the data can be transferred to a computer for storage and further analysis.
The controls are simple and the display shows operating prompts and results in a choice of languages and engineering units. Many functions of the equipment can be configured to suit particular requirements. All settings are protected to prevent operators making accidental changes to the configured settings.
A service reminder gives the operator a notification when a service should be considered. Calibration details can be held in the instrument to aid record keeping for ISO 9000.
Redpost PU recorders are offered with a range of temperature probes for both bottles and cans, spray water temperature probes, mounting frames, and test plugs for on-site checking of calibration. Instruments and probes are calibrated at time of manufacture against standards traceable to U.K National Standards.
Contact AMS Instrumentation & Calibration Pty Ltd
Thank you for your enquiry! AMS Instrumentation &
Calibration Pty Ltd will be in touch as soon as possible.
Sorry, there seems to have been an error.
Please double check your details and try again.
More Articles From AMS Instrumentation & Calibration Pty Ltd
- Mass Flow in Flare Gas Measurement
- Dual Function FS10i Flow Switch/Monitor Performs Double-Duty In Air Or Other Gases To Cut Plant Costs
- FCI Flow Switch Ensures Accurate Chemical Injection or Additive Monitoring for Process Control and Quality
- Next-Gen MT100 Air/Gas Flow Meters For Large Diameter Pipes, Stacks and Ducts